Before commenting read Forum rules
Don't comment the topic if you have a new question.
You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.
Forums
Hi Mikko,
I don't understant why I'm not able to write a new value (ex: 0.0.22.0.0.255) for HDLC destination address in cosem objects 0.0.25.9.0.255 and 0.4.25.9.0.255. There is no problem when we set an IPV6 address with service=Tcp.
The meter response says "Hardware fault" :
11:03:02
<!-- Invocation Counter: 2238247983 -->
<!-- Decrypt data: C1 01 C1 00 28 00 04 19 09 00 FF 03 00 02 03 16 05 09 06 00 00 16 00 00 FF 16 00
<SetRequest>
<SetRequestNormal>
# Priority: High, ServiceClass: Confirmed, Invoke ID: 1
<InvokeIdAndPriority Value="C1" />
<AttributeDescriptor>
# PushSetup
<ClassId Value="0028" />
# 0.4.25.9.0.255
<InstanceId Value="0004190900FF" />
# Send Destination And Method
<AttributeId Value="03" />
</AttributeDescriptor>
<Value>
<Structure Qty="03" >
<Enum Value="05" />
# 0.0.22.0.0.255
<OctetString Value="0000160000FF" />
<Enum Value="00" />
</Structure>
</Value>
</SetRequestNormal>
</SetRequest>
-->
<glo_SetRequest Value="308568F42F55082A693249D93F81F86952F3FA8E45C1E1402FED49973DE0A9DE62B3C58F1719B9460A6B3F0A" />
11:03:02
<!-- Invocation Counter: 931157354 -->
<!-- Decrypt data: C5 01 C1 01 0D
<SetResponse>
<SetResponseNormal>
# Priority: High, ServiceClass: Confirmed, Invoke ID: 1
<InvokeIdAndPriority Value="C1" />
<Result Value="HardwareFault" />
</SetResponseNormal>
</SetResponse>
-->
<glo_SetResponse Value="303780556AF3898061C24700E50051A256FCDD9714B3" />
Hi,
Hi,
The content of the data seems correct. You need to ask the meter manufacturer what they are expecting and is the meter supporting HDLC push messages.
BR,
Mikko