Before commenting read Forum rules
Don't comment the topic if you have a new question.
You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.
Forums
Hi sir,
iam trying to read L&T EM101+ meter data using DLMS director.
but iam unable to read data. iam getting error as failed in diconnect mode.
settings are client address is 0x11
authentication: Low
password: lnt1
on meter it is printed as compatible with IS 15959 CAT C3
this is my log
16:18:34 Initializing serial connection.
16:18:35 Send SNRM request.
7E A0 07 03 23 93 BF 32 7E
Data send failed. Try to resend 1/3
16:18:40 Data send failed. Try to resend 1/3
7E A0 07 03 23 93 BF 32 7E
Data send failed. Try to resend 2/3
16:18:45 Data send failed. Try to resend 2/3
7E A0 07 03 23 93 BF 32 7E
Data send failed. Try to resend 3/3
16:18:51 Data send failed. Try to resend 3/3
7E A0 07 03 23 93 BF 32 7E
16:18:56 Failed to receive reply from the device in given time.
7E 20 07 03 23 13 3F 32 7E 7E 20 07 03 23 13 3F 32 7E 7E 20 07 03 23 13 3F 32 7E 7E 20 07 03 23 13 3F 32 7E
16:18:56
7E 20 07 03 23 13 3F 32 7E 7E 20 07 03 23 13 3F 32 7E 7E 20 07 03 23 13 3F 32 7E 7E 20 07 03 23 13 3F 32 7E
16:18:56 Disconnect request
16:18:56 Send Disconnect request.
7E A0 07 03 23 53 B3 F4 7E
Data send failed. Try to resend 1/3
16:19:01 Data send failed. Try to resend 1/3
7E A0 07 03 23 53 B3 F4 7E
Data send failed. Try to resend 2/3
16:19:07 Data send failed. Try to resend 2/3
7E A0 07 03 23 53 B3 F4 7E
Data send failed. Try to resend 3/3
16:19:12 Data send failed. Try to resend 3/3
7E A0 07 03 23 53 B3 F4 7E
16:19:17 Failed to receive reply from the device in given time.
7E 20 07 03 23 53 33 74 7E 7E 20 07 03 23 53 33 74 7E 7E 20 07 03 23 53 33 74 7E 7E 20 07 03 23 53 33 74 7E
16:19:17
7E 20 07 03 23 53 33 74 7E 7E 20 07 03 23 53 33 74 7E 7E 20 07 03 23 53 33 74 7E 7E 20 07 03 23 53 33 74 7E
System.TimeoutException: Failed to receive reply from the device in given time.
Hi, Ask if there is a…
Hi,
Ask if there is a firmware update available for your meter. The meter returns an invalid reply.
7E
20 //WRONG. This should be A0.
07 03 23 13 3F 32 7E
BR,
Mikko
hi sir, i updated in tools-…
hi sir,
i updated in tools->manufacturers-> update online
but no use
do we need to ask the vendor directly.