Hello,

When Reading meter with NO Authentication, It reads some obis, I read Invocation counter from it, then increment t. Then Use Chiper as given in example. But In initialization, it fail to connect and give this error of 260 out of memory.

I am using this for setup:

Hello,

Previously I have IS 15959 Part1 Supported meter, I can communicate with it using low level authentication from C library. Now I received IS15959 Part 2 Supported meter, But I can't communicate with it, It gives error of 279 (Authentication Error).

Please help me that what configuration or parameter needed to communicate with IS 15959 Part 2 meter.

Thanks

Hi,

I have tried run DLMSServerExample and have read its objects with DLMS Director. When I have read the whole group of objects, for example Registers, everything has worked correctly. But if I have read only single object (with right click on object and select Read option or Read object option), this exception on DLMSServerExample server occurs:

Exception: read access violation.
**_Pnext** – 0xDDDDDDE1.

Hello, dear.

I'm using your Delphi test program to communicate with a electricity Meter. Program enumerates all Objects and its properties very good. But what about Methods, how correct enumerate them?
Can you help with code sample.

Thanks

Hi Mikko,

Is there any support to broadcast the request (Connect/Disconnect/FW update etc) in Indian Standard IS15959-2 supported meter?
TCP/IP and RF communication protocol used.

If supported, then how I can configure and initiate the Request.
Can you please provide your Input.

Regards
Bhaumik

Hi all,

I was asked to read the following from a meter.

Sum Li Reactive power QI; Time integral 1 1.0.5.8.0.255
Sum Li Reactive power QI; Time integral 1 1.0.6.8.0.255
Sum Li Reactive power QI; Time integral 1 1.0.7.8.0.255
Sum Li Reactive power QI; Time integral 1 1.0.8.8.0.255

I am using an iskra MT372.
After reading the appliction association view using Gurux Director, I could not find the requested objects...
Does it mean that the meter does not implement these objects (they seem pretty standard to me)

Authentication Mecanism error
Hi everyone. I am trying to use python libraries to communicate with an Elster A1800 meter. I manage to apply the "readDLMSpacket" method and get the UA response. However, after applying the "parseAareResponse" method I get the "Authentication mecanism is requiered" error even though it indicates a low authentication level when starting the code with its respective password. What can this error be due to? and how can I solve it? Thank you.
I attach the photos of the errors.

Thanks and best regards.

Dear Mikko,

I am using "arm-oe-linux-gnueabi-gcc -E -march=armv7-a -mfloat-abi=softfp -mfpu=neon --sysroot=$SDKTARGETSYSROOT" compiler wherein I am facing issue in linking the application folder.
I am using the following
LINKER = arm-oe-linux-gnueabi-gcc -E -march=armv7-a -mfloat-abi=softfp -mfpu=neon --sysroot=$SDKTARGETSYSROOT -o instead of
LINKER = g++ -o(which was present in example provided).

Hi everyone. I am trying to use python libraries to communicate with an Elster A1800 meter. I manage to apply the "readDLMSpacket" method and get the UA response. However, after applying the "parseAareResponse" method I get the "Authentication mecanism is requiered" error even though it indicates a low authentication level when starting the code with its respective password. What can this error be due to? and how can I solve it? Thank you.
I attach the photos of the errors.

Thanks and best regards.

I have a meter that I use it's gprs modem to read data. but when I read parameters , it send some Irrelevant packets with different source and target address. is there a way to ignore this packets ?
in below example, last packet is of this kind.