gurux_dlms version: 1.0.145
gurux_net version: 1.0.19
gurux_serial version: 1.0.20
Authentication: 0
ClientAddress: 0x10
ServerAddress: 0x5a7c
Standard: 0
TX: 19:22:46 7E A0 0A 00 02 68 F9 21 93 51 F1 7E
RX: 19:22:46 7E A0 21 21 00 02 68 F9 73 89 93 81 80 12 05 01 80 06 01 3E 07 04 00 00 00 01 08 04 00 00 00 01 07 22 7E
TX: 19:22:46 7E A0 2E 00 02 68 F9 21 10 37 4B E6 E6 00 60 1D A1 09 06 07 60 85 74 05 08 01 02 BE 10 04 0E 01 00 00 00 06 5F 1F 04 00 1C 03 20 FF FF 80 AB 7E

Hi,

i am using the gurux DLMS data collector, here i run the code with wirepas sdk, with wrapper mode after sending the aarq request, it will not wait to receive the data in the readDLMSPacket they placed the "reply->complete" as 0 and in do while loop there is a condition to read then it automatically break the while loop please suggest to receive the data from the mode , and every time we are receiving the aarq connect command only. and aarq failed is sent to sink via RF(ie.,app.c line no 340

Hi,

I'm using example application "AtMega2560\GuruxDLMSClientExample" from GuruxDLMS.c.

Between the DLMS client and meter, HDLC connection is setup by transmitting and receiving SNRM and AARQ requests and responses. However, after that the application fails to read data object "0.0.42.0.0.255".

As we get RR frame with NS and NR = 0
Subtest 2: Check that the IUT is in NRM
Send an RR frame. Expect an RR frame.
This test went wrong...

Using C++ lib

Hi, i am using the gurux dlms data collector with wirepas , while i am using with HDLC i received the Connect command "7E A0 07 03 21 93 0F 01 7E" with client address 0x10 and while the reply is giving

"7E A0 1E 21 03 73 C3 7A 81 80 12 05 01 80 06 01 80 07 04 00 00 00 01 08 04 00 00 00 01 53 3B 7E"

code went into the DataReceivedSP function and set the "received" flag as 1

in the below function

Hi,
with Python I am trying to use the main.py example here: https://github.com/Gurux/Gurux.DLMS.Python/tree/master/Gurux.DLMS.Clien…. How can I launch it to read a specific register or a list of them?
Is it possible to have a basic example with a console python command?

Thank you in advance for any help.

Best,
Davide

Hi,
I am using the gurux dlms client and i opened the project in vs code,
but it is not compiling , what i need to do, i am new to dlms.
other than vscode is any ide to debug the dlms project.

Regards
Raja

Hi, Mikko!

Hi

I need to know how to read a single Obis code with python, i've tried the following obis code which is for voltage value 1.1.32.7.0.255, I've been using GXDLMSDemandRegister, GXDLMSData, GXDLMSRegister and all I get is an error.

- Is it possible to pass an obis code as a string to those functions?
- is it possible to read single obis code without reading the getAssociationView first?

Good afternoon!

There is an original configurator of metering devices MIR. The program can only work with one metering device at a time. The task arose to implement batch processing. The developers recommended your project because their configurator is based on it. Since python is closer to me, I decided to look into this branch. To communicate with the counter, the program sends a 12-byte snmr command:

7ea00a00025853c99357e67e

port 10000, password 00000000, administrator access level, address structure 4 bytes, information field length 128, device address 5673.