Read DLMS EDMI ATLAS MK10E seem wrong in Obis Code List and Data readout.

Comparing Eziview DLMS Reader with GURUX Director (Just take some items)

1. OBIS Code [1.0.32.7.0.255] L1 Voltage Inst. value
2. OBIS Code [1.0.51.7.0.255] L2 Current Inst. value
3. OBIS Code [1.0.31.7.0.255] L1 Current Inst. value
4. OBIS Code [1.0.52.7.0.255] L2 Voltage Inst. value
5. OBIS Code [1.0.14.7.0.255] Supply frequency Inst. value

In Gurux result have difeerent in their text description also the value read.
Attached the detail

Hi,

I wnat to know what is the DataType or ClassObject of a breakerControl action?
The main idead is that I want to make a relay ON/OFF of a meter through gxdlmsDirector.

thank you.

BR,
Badi3

Hi,
I'm trying to read objects from Sagem Meter using GXDLMSDirector but I'm occuring the below issue:

System.Exception: GetObjects failed. Meter returns Service not allowed exception. Operation not possible
à GXDLMSDirector.MainForm.ReadDevice(GXDLMSDevice dev)
à GXDLMSDirector.MainForm.Read(Control sender, Object[] parameters)

Could you help me please?

BR,

Hi,
I'm using GXDLMSDirector and I try to read Clock from the Meter.
Below the log file:

Hi
Version 8.0.0.20 it works and 8.0.0.23 provides access error. What is the reason?Thank you.

16:35:25 Authenticating
7E A0 2E 00 02 02 A7 09 32 66 72 E6 E6 00 C3 01 C1 00 0F 00 00 28 00 00 FF 01 01 09 10 D6 3F 0A 25 F0 CE D1 04 CF 4D 71 E1 49 0D 50 E3 1D 36 7E
16:35:26 Received data
7E A0 26 09 00 02 02 A7 52 F2 FF E6 E7 00 C7 01 81 00 01 09 10 98 58 88 E2 90 8E 4D 5F 90 5D 3F E7 48 6B AB 91 7C FA 7E
Gurux.DLMS.GXDLMSException: Access Error : No Long Get Or Read In Progress.

I have SL7000 and I want to configure my PC to read some information i used GXDLMSDirector application and I'm writing the information with default but when I press connect i received the message "fieled to recieve the reply Divice Given time "

Hi

I am trying to connect a ISKRA MT880 via network.

The meter is connected to the net via media converter ethernet -> RS485 and it is accessible via ISKRA software without any problem.

In director I have setup the ip address, password, and the hdml address of the counter. When I try to connect no answer.

I have attached a snapshot of the settings.

Any idea what's could be wrong.

Thanks a lot
Best regards,
gp

I thank you from my heart for your reply
I encountered problems during the ACE configuration SL7000
I need the following information
                 - HDLC Addressing Scheme _____________
                 - Physical Device ID ___________________
                 - Client ID __________________________
                 - Logical Device ID ____________________
                 - Application Context__________________
                 - Level Authentication (Password) ________

HLS need 4 step to finish authentication.
can director support HLS(AES128) authentication?

Hi

I'm trying to connect to meter with LLS. It seems like DLMS Director sends a disconnect request after pasing the reply. What can cause this? See log below.