Forum Rules

Before commenting read Forum rules

Don't comment the topic if you have a new question.

You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.

Description

Questions and comments about DLMSDirector.

Image
By mohamadop , 17 September, 2020

connectivity issue

Forums
DLMSDirector

Hi ,

I want to connect with the smart meter CLOU CL710K22 with IR cable but can't reach the meter .
Can you please check these device settings , and the logs below :

By anudeep02 , 17 September, 2020

Invalid Authentication Key Error

Forums
DLMSDirector

Hello Mikko,

I'm getting an error dialog box of "Invalid Authentication Key", while adding device in GuruX software.
I want to test meter according to "Indian standard" for "Meter Reader Association". The procedure I followed is as below,

By dntimmie , 17 September, 2020

EMH LZQJ-XC icw Variomod-XC LTE

Forums
DLMSDirector

I have a EMH LZQJ-XC in combination with the EMH Variomod-XC LTE. I can connect to the meter with their software (Combimaster), but not with Gurux DLMS Director. All setting are OK. Beneath the log if I connect:

By almoustakbal , 14 September, 2020

Clou electronics ,Wasion , Sanxing Smart Meters

Forums
DLMSDirector

Hi ,

We want to test the smart meters below with hdlc and tcp/ip connection :

- CLOU eclectronics CL710K22 ,
- SANXING S12U16,
- WASION aMeter100.

We cant raed these meters with GXDLMSDirector ?

Thank You in advance .

By nipam.bhavsar , 11 September, 2020

Query related to IEC62056-21 mode E support

Forums
DLMSDirector

Hello GuruX Team,

Greetings !!!

We are currently working on our own custom meter and testing with DLMSDirector software. Our custom meter is having support of IEC62056-21 optical port mode E and want to test with DLMSDirector software.

By dwnmastrodomenico , 9 September, 2020

GXDLMSDirector A1800 Elster RS232

Forums
DLMSDirector

Greetings to all.
I would like to ask for help to connect and read an A1800 Elster meter with the GXDLMSDirector Tool. I already have the physical connection made, but I cannot find the appropriate configuration with the GXDLMSDisrector to access the information.

I have reviewed in the forum some spaces that deal with the subject, but they do not define a configuration to make the reading from GXDLMSDirector with the Elster A1800 as described with other meters in https://www.gurux.fi/GXDLMSDirectorExample.

By Bhaumik , 31 August, 2020

Not able to write from Director

Forums
DLMSDirector

Hi Mikko,

I am trying to write Passive Relay Time (1.0.96.128.30.255) into IS15959-2 meter.

In that, If I change any value of structure and try to write, I got an error message as shown in the attached image. Please check.

Following is the response from meter:

<Structure>
<UInt32 Value="500" />
<UInt32 Value="900" />
<UInt8 Value="4" />
<OctetString Value="FF FF FF FF FF FF FF FF FF FF FF FF" />
</Structure>

DLMSDirector