I guess my first question is, is it possible to use DLMSDirector to connect to an Elster A1700 (or AS230)?

I keep getting 'Failed to receive answer from the modem. Check serial port' - although the modem is dialing the number and the modem attached to the meter is answering (from listening in).

Log (with phone number removed):

Hi.
Please tell me how can I connect to the Hexing 110 meter using GXDLMSDirector? Connection via RS-485. I have no documentation for this meter, it has been lost. What settings will I need to set?

HI,

I have downloaded Gurux DLMS Director for .Net 4.6.

As per the direction from the page Gurux.DLMS.Simulator, i am trying to start the simulator by dotnet bin/Debug/netcoreapp3.1/Gurux.DLMS.Simulator.Net.dll.

Its showing "counld not execute because the specied command or file was not found".

dotnet --info is showing version 5.0.302

I an unable to find any of the Gurux.DLMS.Simulator files in my computer

Do I need to download any other files

Thanks & Regards
Shibu

Hello. I didn't see Start Protocol in the new version of the DLMS director.
But I have to read this meter with an optical port and I don't know how can I do this with the new DLMS Director.

I created a sample meter with an Arduino Mega using Gurux's sample Arduino code then tried to connect to it using the DLMS director. I If I connect with the authentication set to High and password as 'Gurux' (as described in Gurux's youtube video about the DLMS director) I get an error message: 'Invalid password. Server to Client challange do not match.' I am able to connect to the meter when I set the authentication to none. Request you to please help in this regard.

Thanks

Hi,

As it was forementioned in another topics, "increasing authentication" we can read all objects from the smartmeter. I have already increased to "Low" and I have used a couples of passwords provided by the owner of the smarmeter, but I obtain some errors. I tried also change to "Reading Client" for checking energy data (Client Id. 2) . Dou you have any idea what could be my problem? Maybe the passwords are provided are wrong ? or should I add an optic probe? Im only using serial communication via USB-RS232.

Please I have been trying to connect to a Premier 300 without success. Please kind see attached picture for the set up. Your kind guide on how get it done will be appreciated. Also, find below the trace:

13:13:43 Collecting objects
TX: 7E A0 2C 03 41 32 9F 9F E6 E6 00 D0 1E 30 00 00 00 01 C3 4A F9 D0 BC 47 86 8B 1F 2E 7E 43 51 F3 F8 A9 FB 12 50 67 E3 47 00 03 9A A9 C2 7E
13:13:44

We are having problem reading the Landis+Gyr E550 DLMS meter via RS232 port. We connect the meter to the RS232 port through the RJ45 connector on the meter.

After configuring the DLMSDirector and tried to establish connection to the meter, it failed time out. So we are thinking maybe configure the settings on the DLMSDirector incorrectly or we make an incorrect connection to the meter.

If anyone have interface to Landis+Gyr E550 to the DLMSDirector through RS232 serial port, please share with us the configuration, it will be great!

Hope to hear from you guys.

When I am connected gurux to my meter using suite 1 High level with ECDSA authentication mechanism it shows a pop-up error message "Not enough data".

please guide me to resolve this error.

thank you.