Hi!

I'm working on a project with some Hexing meters. I was able to connect to the meter via the optical port using HDLCWithModeE at 300 baud, 7E1, with GURUX DLMS Director and Python, and publish the data via MQTT. However, I don’t know how to establish a connection through RS485. I’ve tried multiple baud rates, servers, and users using the baud rate scan in GURUX DLMS Director, but without success.

The final goal is to have an ESP32 connect to the meter via RS485 and publish the acquired data to my MQTT server.

inaccessible MT880 neither locally nor remotely due to an configuration error for the channels. is the a way to access into it . thanks in advance

I am using the NXP AN12837SW reference design for my smart metering project with the MKM35Z512VLL7 controller. Now I want to transfer/send my .bin file to uart terminal through serial wire(not in gsm) for firmware upgrade.
Could you please clarify the following points:
1. How to load the (.bin) file in Gurux, How to divide it into 256-byte chunks and How to add CRC/AES Encryption data for transmission?
2. What is protocol/documentation available for image transfer?
3. Can we send the firmware without OBIS code through uart?