I am trying to use DLMSExplorer to be able to listen to a TCP port 4059 for TCP wrapper COSEM packet. I have tried to do it myself, and used an Hercules windows utility to connect to machine with Gurux listening at port 4059 port. From Hercules I send the wrapper packet, but there is no sign or traffic being displayed on Gurux GUI.
If I used another listener like Hercules at the TCP listening end, the same wrapper traffic is seen as expected. So, there must be something I am missing to setup the Gurux DLMSEDirector properly. Can someone help me to do it correctly with probably some instructions or snapshorts, will be great help for me.
You can see Push messages selecting "View" | "Notifications" | "Hex" menu. Then you need to start the listener.
Select "Start" from "Notifications".
Default Port is 4059. You can change it from Notifications tab selecting "Tools" | "Settings" menu.
DLMS PUSH message on GXDLMSDirector
Hi,
You can see Push messages selecting "View" | "Notifications" | "Hex" menu. Then you need to start the listener.
Select "Start" from "Notifications".
Default Port is 4059. You can change it from Notifications tab selecting "Tools" | "Settings" menu.
BR,
Mikko
Hi Mikko,
Hi Mikko,
Thank you very much!
I can see the Hex and PDU option even gives some parsed information, quite helpful for me.
Best regards,
Biswanath