Hello Gurux experts!

I am reading SamGas RSE meter via OpticalPort using DLMSDirector.
The problem is: when i read ALL values, i still get just a part of it. (11 of 70 on screenshot)
I also tried reading by range or dates, but meter returns error in both cases.
What am i missing?

Hello,
I have a E450 and GXDLMXDirector v8.1.1904.0201. I'm interfacing with the meter using this little device right here : https://www.ebay.com/itm/USB-transfer-MBUS-module-slave-module-communic…
It plugs into the consumer interface at the bottom of the meter, not the optical one.

Hi!

i have in pdf-manual Landys+gir this value:
2.8.0 Energia totale attiva A -
2.8.0.W Energia totale attiva mese precedente A -

in register (GXDLMSDirector, serial connection) i have
1.1.2.8.0.255 = "Time integral 1, total, current billing period"

so

2.8.0 = 1.1.2.8.0.255 ok..
but

where i can find 2.8.0.W??
thx

Hi, i have problems in using gxdlms director to communicate with an EMH NXT4 meter. However, if using their provided software, i can establish the communication plus i am able to take readouts using the software. The settings used in the proprietary software is described below : -

Communication : COM PORT (COM 1)
Baud Rate : 9600
Login password: 123
w5-password : 123
Meter Address : meter_serial_number

what is the equivalent setting that i could set in gxdlms director?

Hey,

I want to implement a device on the optical port to communicate with the smart meter. i want to use gurux to communicate by HDLC with the smartmeter. And use the device to communicate to the existing DLMS/COSEM-TCP-IP connection. So in order to get this working a need a protocol translator from DLMS/COSEM-TCP-IP to DLMS/COSEM-HDLC
and then in reversed order DLMS/COSEM-HDLC to DLMS/COSEM-TCP-IP.

So my question about this is:

is there already something like this implemented?

If not can you point me to a good point to start with?

Thanks:)

Hello. DLMS has complex-structured objects like(like Clock, Auto-Connect schedule, Profile Generic).
Is there any general principles on how to read those using Gutux Java library?
A little guidance would be very helpful.
Thank you.

Hello Experts.
DLMS Director manages to succesfully read values from a secured meter.
But when i try to do same stuff in Java, i see the error "Invalid HDLC Frame: 50 Expected: 30".
That's it.

The device is using Pre-established accosiation, so the steps are:
1. Connect to public client with no ciphering.
2. Read invocation counter
3. Send disconnect
4. Connect using Management client (01)
5. Don't send AARQ since it's pre-established.
6. Read the stuff.

Hi sir,
I have basic information about energy meter like port no,server no,client no,interface type.
I have to read data from energy meter(Apex100 secure) using rs485 medium over TCP/IP DLMS protocol.
My problem is
1.Can i used this ClientServerExample.cpp file? if Yes How can i used ?
mean how can i gave input to this file.
2.Where/How i can deploye(upload) program.
3.Any application files which is used for this?
4.if above point are not valid so how can i read data from dlms smart meter ?

Hello Everyone,
Im new one in DLMS Protocol. I dont no how its work.
I want to communicate APEX 100 Secure meter through rs485 using DLMS protocol.
i dont no how to start.
any guideline or suggestion
Thank you.

Hello, I have a few meters on a single rs485 line and I'm trying to read them via dlms protocol. I know that I have to provide something called lower physical address somewhere but I do not know where to excatly and how can I obtain it from the meter. I have three Landys Gyr meters, /LGZ5\2ZMD4104459.B30, which I know can be read both by IEC and DLMS.
There are two functions in java gurux library which I presume are the key to the communication in this use case:
public final void setServerAddress(final int value) {
settings.setServerAddress(value);