Before commenting read Forum rules
Don't comment the topic if you have a new question.
You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.
Forums
Hallo,
I try out to read IskraEmeco MT171
Here is the LOG:
20:29:39 Initializing serial connection.
20:29:39 HDLC sending:/?!
20:29:40 HDLC received: /ISk5MT171-0222
20:29:40 Bitrate is : 9600
20:29:40 Moving to mode E.
06 32 35 32 0D 0A
20:29:40 Send SNRM request.
7E A0 07 03 23 93 BF 32 7E
20:29:58 Failed to receive reply from the device in given time.
The meter is accepted, but there are no readings.
What can I do?
IskraEmeco MT171
Hi,
We have updated Iskraemeco settings.
When you start GXDLMSDirector there is a option in menu bar:
"New manufacturer settings available".
Press that and download newes settings.
When you create new device your settings should look something like this:
http://www.gurux.fi/GXDLMSDirectorExample
Let me know if you have still problems.
BR,
Mikko
ISKRA MT171
I tried above with following result
11:43:59 AM Initializing serial connection.
11:44:00 AM HDLC sending:/?!
11:44:00 AM HDLC received: /ISk5MT171-0133
11:44:00 AM BaudRate is : 9600
11:44:00 AM Moving to mode E.
06 32 35 32 0D 0A
11:44:01 AM Send SNRM request.
7E A0 08 02 23 C9 93 E4 43 7E
11:44:16 AM Failed to receive reply from the device in given time.
FF F0 8C 83 F6 7F 67 BC FF F0 8C 83 F6 7F 67 BC FF F0 8C 83 F6 7F 67 BC
Timing problem?
What do I have to do to make it work?
Rgrds
IskraEmeco MT171
Hi,
There was problems with Iskraemeco that occurred sometimes.
We try to send Move Mode E command too fast. :-(
Download new version GXDLMSDirector. It is working with Iskraemeco meters.
BR,
Mikkko