Before commenting read Forum rules
Don't comment the topic if you have a new question.
You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.
Forums
Hi,
I have failed to connect ITRON energy meter with GXDLMSDirector by using RS485
First of all , im quite confuse on the connectiom from ITRON.
It has RX + and RX-, TX + and TX -.
Which connection should i use to communicate with the moxa converter RS485
Hi,
Hi,
Usually, TX+ is Y, TX- is Z, RX- is B and RX+ is A, but you need to check this from the Moxa and Itron documentation.
BR,
Mikko
Hi, thanks you. I can read
Hi, thanks you. I can read the ITRON energy meter. But it is very slow to read and respond. Can i know why
Hi,
Hi,
Serial port communication channel is not so fast.
When the connection is established and the meter is read for the first time the association view is read. There is a lot of data transported between the client and the meter. You should save the association view and read only the objects what you need. It will save a lot of time.
BR,
Mikko