Hi
We are receiving pushed messages from Star meters, this works fine as long as everything comes in one message. However we no have encountered that the message is splitted in two as shown below. Taking the data from these two messages and combine we can see it is a valid PDU of values. (https://www.gurux.fi/GuruxDLMSTranslator)

However we can not figure out how to combine these messages using Gurux.

Hello Mikko,
I am trying to read out a simple attribute of one object (obiscode) using the python library.
It looks like the meter accept the SNRM and also AARQ. But I am not able to read the attribute
Would you please check this code:

Hi Mikko,

We are using Gurux DLMS Simulator for testing.
After reading for some meters (~50 meters), Gurux simulator stopped with assertion failed error.

Please check the attached image for reference.
Can you please provide your input on this.

Regards
Bhaumik

Hi sir
I started the client C library with stm32 and read meter with serial. Now I want to connect to AMI with gprs module. What should I do send and recieve data ami gurux? And how do I implement TCP?

Hello,

Why two OctetString is Different but in Comment is same?

First Hex:
7E A0 1E 21 03 12 4C 08 E6 E7 00 C4 01 81 00 09 0C 07 E6 09 01 07 0A 0A 01 FF FF 2E 00 9C 39 7E

Hello. I am trying to implement Atmel Server application with my STM32F1 Nucleo board but the object collection part never ends. I give the logs below. Thank you in advance.

Hi!
Last update can't compile because in header GXDateTime.h error in Constructor for Unix time:

Hi Mikko,
I am using the example main.py to read the meter.
(Located in Gurux.DLMS.Python-master\Gurux.DLMS.Python-master\Gurux.DLMS.Client.Example.python)

Is there an example for Set and Action also?

Many Thanks
Frank

$ python main.py -S COM11:9600:8None1 -c 1 -s 21885 -a HighGMAC -C AuthenticationEncryption -T 3132333435363738 -A D0D1D2D3D4D5D6D7D8D9DADBDCDDDEDF -B 000102030405060708090A0B0C0D0E0F -v 0.0.43.1.0.255 -t Verbose
gurux_dlms version: 1.0.117
gurux_net version: 1.0.18
gurux_serial version: 1.0.18
Authentication: Authentication.NONE
ClientAddress: 0x1
ServerAddress: 0x557d
Standard: Standard.DLMS
Security: Security.AUTHENTICATION_ENCRYPTION
System title: 31 32 33 34 35 36 37 38

I am getting errors in my application like the one below. I do not suspect the software to be faulty per-se (?), as it occurs very rarely. I do suspect my cheap USB MBUS adapter or maybe my selfmade adapter cable to flip bits sometimes. The question is, can data integrity somehow checked before processing? As the meter pushes every 10 seconds, I could easily skip one message if its integrity is violated.

Any ideas?

Martin