Connecting meter EMH LZQJ-XC with GURUX GXDLMSDirector

By ERWAN, 26 February, 2024
Forums
DLMSDirector

Good day developers and communities,

I have project to connect meter EMH LZQJ-XC with Gurux GXDLMS director using serial interface. The information for this meter is very limited in the web. Please help me to configure this meter as my deadline for this project is near. I already try the default setting for the EMH meter but it failed.

Kurumi

9 months 1 week ago

Hi,

Are you using the meter serial number?

Try to change the address type from Default to SerialNumber. Then give your meter serial number to the serial number textbox.

BR,
Mikko

ERWAN

9 months ago

I already insert the serial number but Im still failed to receive data. Attached picture is my configuration setting

Image

ERWAN

9 months ago

Hi,

I am using serial port. Did you mean Logical Server? I already change value of Logical Server to 1 and tested but it failed. How do I change the Logical Address to 1 ? Here is my result of testing. Serial number for my meter is = 8494239.

For Logical Server : 0
11:59:52 Send SNRM request.
TX: 7E A0 0A 00 00 46 1F 21 93 B0 19 7E
11:59:57 Data send failed. Try to resend 1/3
12:00:02 Data send failed. Try to resend 2/3
12:00:07 Failed to receive reply from the device in given time.
12:00:07 Send Disconnect request.
TX: 7E A0 0A 00 00 46 1F 21 53 BC DF 7E
12:00:12 Data send failed. Try to resend 1/3
12:00:17 Data send failed. Try to resend 2/3
12:00:22 Failed to receive reply from the device in given time.

For Logical Server : 1
12:01:31 Send SNRM request.
TX: 7E A0 0A 00 02 46 1F 21 93 38 0F 7E
12:01:36 Data send failed. Try to resend 1/3
12:01:41 Data send failed. Try to resend 2/3
12:01:46 Failed to receive reply from the device in given time.
12:01:46 Send Disconnect request.
TX: 7E A0 0A 00 02 46 1F 21 53 34 C9 7E
12:01:51 Data send failed. Try to resend 1/3
12:01:56 Data send failed. Try to resend 2/3
12:02:01 Failed to receive reply from the device in given time.

Image

Kurumi

9 months ago

Hi,

Your settings look correct. Do you know if someone has changed the baud rate? Try with different baud rates.

BR,
Mikko