Communication with L&G E650 series meter

Forum Rules

Before commenting read Forum rules

Don't comment the topic if you have a new question.

You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.

By MOHIDEEN ISMAIL , 8 January, 2020
Forums
General discussion

Can you please provide the communication settings and cable required to connect between the laptop and energy meter for communicating L&G E650 series energy meter (ZMD402CT44.0007 S3) to your software?

Regards
N.M.Ismail

MOHIDEEN ISMAIL

6 years 7 months ago

Thanks for your reply.

Can you please suggest on the cable type and manufacturer?

Regards
N.M.Ismail

Kurumi

6 years 7 months ago

Hi,

Kamstrup Infrared Optical Reading Head, USB is working well with different meters.
Try to google that and find your local resellers.

BR,

Mikko

MOHIDEEN ISMAIL

6 years 6 months ago

Hi,
While connecting to L&G E650 meters without any authentication (Client ID 16 and Logical Device ID as 1), I could able to get some good values from the meter and for other values it is showing as :READ _ WRITE DENIED. However, with the low level authentication (Client ID 32 and Logical Device ID as 1), all values are showing as bad. Is there any password for L&G meter to get the values as good?

Regards
N.M.Ismail

Kurumi

6 years 6 months ago

Hi,

You need to give a password if you try to connect using a low level password.
You need to ask the password from the meter vendor.
BR,

Mikko

Benix

5 years 9 months ago

hi @Kurumi
I have an l&g E550 meter ,i cant able to communicate serially or via tcp from gurux to that meter.
i will post my configuration settings from gurux side u can verifi it and say if something is wrong

Image

Kurumi

5 years 9 months ago

Hi,

Are you using an optical probe or RS-232? Change Start protocol from DLMS to IEC if you are using optical probe.

BR,
Mikko