Hi,

Can anyone provide me or point to where I can find the bit mapping for the Load Profile Extended Interval Status bit map?

Thanks,

Fred

Hi Mikko,

with your Gurux DLMS Translator I could decode the data and see the XML.
GUEK: 36C66639E48A8CA4D6BC8B282A793BBB

Hi,

I'm implementing the image update in my meter. When I send the binary through GXDLMSDirector, I get the "UnacceptableFrame" error message after ActionRequest of method 2.

Any idea of where my problem could probably be?

Thank you,

Regards.

Hello! I search on entire internet and I didn't find driver for optical probe Landis Gyr AIP200, can anyone help me?

Hi Mikko,

association = GXDLMSAssociationLogicalName(ln='0.0.40.0.2.255')
context = self.read(association,6)
association.authenticationMechanismName = context

association .secret = "Secret"
bytes = association .updateSecret(self.client)
self.read(association , 7)
self.write(association , 7)

I am trying to update password of MR association using python,The code is working fine without error but, the password is not updating in meter.Is there anything missing I am here?

Hi Mikko,

When I am trying to connect MR of a Iskra meter I am getting "ServiceError Initiate Error Exception. Initiate IncompatiableConformance" Exception. Below is the trace

I need to connect meter using LORAWAN protocol I did not find any related articles and details please let me know the kick start how i can connect my meter Using DLMS LORAWAN Protocol..

Below are the requirements

We need to archive a remote AMR capabilities, the prepaid smart meter has a NIC Lorawan modem, that we can use to communicate to it able able to perform the following tasks.

1. Requesting meter energy data's, like Current, voltage, power, remaining balance

Hi Mikko,

java -jar target/gurux.dlms.push.listener.example-0.0.1-SNAPSHOT.jar -i WRAPPER -t Verbose

I tried to run java push listener example using the above command , and I updated the ip address and port number in the meter. when I click on push button I am not receiving the data on my local machine.Is there anything I missed out here?

I am designing a NIC with Quectel BC66 module and it will connect to the smart meter with UART interface. the BC66 module support both UDP and TCP protocols. I wish to know How I can start?

Hi Mikko,

file = open("firmware.bin", "rb")
binary_data = file.read()
reply = GXReplyData()
imageTransfer = GXDLMSImageTransfer()
imageBlockSize = self.read(imageTransfer, 2)
filename = "firmware.bin"
img_identifier = "ABC"