Data only received one time then unknown error

Forum Rules

Before commenting read Forum rules

Don't comment the topic if you have a new question.

You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.

By wahyurahmaniar , 1 July, 2017
Forums
DLMSDirector

Hi,
I try to get data from Actaris Electricity Meter, but it can't be continous.
After I got a success reply, then it always reply with unknown error.
I connected the meter using serial port.

The log result:
4:58:55 PM Initializing serial connection.
4:58:55 PM Send SNRM request.
7E A0 08 02 21 21 93 05 D1 7E
4:58:55 PM Received data
7E A0 08 21 02 21 73 CA 70 7E
4:58:55 PM Parsing UA reply.<CR><LF>
4:58:55 PM Parsing UA reply succeeded.
4:58:55 PM
7E A0 2C 02 21 21 10 17 2A E6 E6 00 60 1D A1 09 06 07 60 85 74 05 08 01 01 BE 10 04 0E 01 00 00 00 06 5F 1F 04 00 40 1E 1C FF FF 3B 7F 7E
4:58:55 PM Received data
7E A0 0D 21 02 21 97 B4 F7 10 00 01 6B 5B 7E
Gurux.DLMS.GXDLMSException: Unknown Error.
at GXDLMSDirector.GXDLMSDevice.InitializeConnection()
at GXDLMSDirector.MainForm.Connect(Control sender, Object[] parameters)

Do you know what is the problem?
Thanks in advanced.

Hi, Mikko

Thanks for your reply.
I have try this combination:

Client address: 11
Physical address: 11
Logical address: 1

Client address: 10
Physical address: 1
Logical address: 0

Client address: 10
Physical address: 11
Logical address: 1

Still didn't work.

Do you have any solution?
Thanks in advanced.

Well, after I check it again, I think it's a little different with Actaris.
May be it's not an Actaris meter.

I try to send the hex PDU like Director log using Hyperterminal and got some reply from meter.
But, Gurux translator can't translate it.

Is it because Gurux can't translate the longer byte?

wahyurahmaniar

9 years 2 months ago

hi, Mikko

I have sent you email last week.
Thank you.