Before commenting read Forum rules
Don't comment the topic if you have a new question.
You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.
Forums
Hi Team Gurux,
First of all we would like to thank for your great effort to provide Gurux library.
We have successfully read Holley meter DTSD545 via serial port. Now we want to read same meter via tcp remotely, but little bit confused how we will identify the meter on the server i.e meter serial number.
Our meter is online and can provide server detail if you need.
Will appreciate your prompt response,
Regards,
Sohail
Holley Meter DTSD545
Hi,
Are you using direct TCP/IP, GPRS or do you have TCP/IP to serial port converter?
BR,
Mikko
@ Sohil
@ Sohil
how you read meter on serial
could you send me the connection settings
Holley Meter DTSD545
Hi,
Select "Holley Metering Ltd" as a manufacturer and set correct serial port settings.
BR,
Mikko
I already did it in this way
I already did it in this way, but the issue is still.
I use optical cable ,
The meter can be connected using another software, this means that the cable is good and no issue in connection settings, but when i try to connect meter using your software, the connection fail.
Also, plz find my below screen shot.
Thanks in advance,
Ahmed
Holley Meter DTSD545
Hi,
Can you get a trace from the bytes sent by other software? Client or server address must be different.
Have you checked serial port settings (baudrate, etc)?
BR,
Mikko