Can't read Profile Generic Billing profile(IOBIS:1.0.98.1.0.255) by com_readRowsByRange()

Forum Rules

Before commenting read Forum rules

Don't comment the topic if you have a new question.

You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.

By mightyChamp , 13 May, 2021
Forums
Gurux.DLMS

Hello,

I am trying to get Billing Profile. It can be accessed by com_readRowsByEntry(), but no data in index 2 when read by com_readRowsByRange(), with start and end time.
com_readRowsByEntry
Other OBIS like "1.0.99.2.0.255" Daily Load profile. works on both functions com_readRowsByEntry() and com_readRowsByRange(). I used similar way as of "1.0.99.2.0.255" for Billing, but it is not working.

For start time and end time , I first read clock, and give its value to end time and start time, and by function time_addDays(), I substract 90 days from start time. then use start and end time in com_readRowsByRange(), as described below:

startTime=endTime=clock1.time;
hrs=0-hrs;
time_addDays(&startTime,90);
com_readRowsByRange(&pg,&startTime,&endTime);

Please help me to solve this issue, I want to read data between time period.

Thank You

Kurumi

5 years 4 months ago

Hi,

Can you read this with GXDLMSDirector? Some meters expect that the minutes and seconds are set to zero. Check first that.

BR,
Mikko

mightyChamp

5 years 4 months ago

I also tried by clearing minute and hour value but still facing issue. and I can read data by GXDLMSDirector.

Kurumi

5 years 4 months ago

Hi,

Can you add the GXDLMSDirector log? Only the read command is enough so I can check the bytes.

BR,
Mikko