I like to read obis code an EMH LZQJ-XC.

I used GXDMLSDirector, and it work well.

Now i'd like to read a register, so in C#, i connect to it, parse UA reply and make AARQ request (as the doc).
all seem work,
but now how to read an obis register? there is no example and the client object (GXDLMSClient) has no getObjects method??
can you give me a clue to do that?

Hi,

I would like to know, if you have any knowledge about smart metering with french device.

I need to get data using GSM.

The French company who produced the energy, based their protocol on the DLMS, so I think, that your soft can be used to get data consumption, but I don't know how to use in that specific case.

Hi!

I originally sent this as an e-mail but I thought it might be better to share it here.

I got an exception while trying to write the CapturePeriod attribute, so I changed the data type in accordance to the Blue Book; from Int8 to UInt32.

I have created a pull request here in case you're interested:

https://github.com/Gurux/Gurux.DLMS.Net/pull/2

Works good for me but I haven't run any tests. Are there any I should run before creating a pull request?

Hi all,

I'm playing GuruxDLMSServerExample from Gurux.DLMS.cpp and GXDLMSDirector.

I wanted to use DLMS_DATA_TYPE_FLOAT32 type for register values for my test, but GXDMLSDirector was displaying a completely wrong values.

First of all, I've checked the code of CGXByteBuffer::SetFloat(), because what was send by Gurux.DLMS.cpp seems to be wrong and I think I found the problem:

Hi Gurux

My aim is to reset the loadprofile buffer using the gurux.

Obis Code 0.0.10.0.0.255

It is Data 4 according to logical device specification.

However what method do i call to execute the script to clear the load profile data.

Regards

in the library of Gurux.DLMS.Net, the API of GetLNPdu determine when to AddLLC data(AddLLCBytes)
From that criteria, if ciphering is TRUE, then LLC bytes will not be added.
However, I can not find the relationship between ciphering and LLC from Green book.
Please guide me this criteria is based on which references.

Thanks in advance.
BR
Ray

Hi,
can you please help me, what I am making wrong?
When I add device with manufacture ACE device communicate (but say wrong manufacture ID ZPA not ACE).
When I create new manufacture ZPA with same setting like ACE, device communication timeout.
I think problem is in save setting of serial port, because every time when i reopen device properties, i must set serial port again.

Hi all,

I'm trying to connect to the CX2000 Meter but I always occur an issue in the AARQ request.

Please find below the log:

Hi Guys,
Do you have any plans to have a UWP / Xamarin DLMS library for the DLMS component?

Thanks
Andrew

Hi!

I was wondering whether it is possible to request a single SN object instead of all of them using GetObjectsRequest. Let's say I want to read the clock but I only have the logical name; retrieving all objects would feel unnecessary and would generate unwanted traffic.

Is there some kind of command to retrieve a specific object instead all of them?