Hello,

We are searching for Indian Specification 16444 DLMS library for Smart Metering products implementation. Have you updated your library to support?

Hi!

I received a smartmeter from the local powercompany and recenently they allowed me to enable the (IR) userinterface to read out data.

The problem is that they are not very forthcoming with information regarding this interface so I'm not 100% sure how to implement the readout of the meter.

Here are the facts and what I know so far:

Hardware:
ISKRA (Iskraemeco) AM550
It has an optical interface (IR LEDs)
I have a USB to Serial to IR LED interface Cable

Hello Gurux,
I've successfully compile Gurux.dlms.c on Arduino both Mega2560 and ESP32 board, and connect it to the Actaris (Itron) SL7000 (SL761B070 2004) trough RS232 interface.
can someone explain how to fill the parameter of the "cl_init()"
I have tried:
cl_init(&meterSettings, 1, 16, 1, DLMS_AUTHENTICATION_NONE, NULL, DLMS_INTERFACE_TYPE_HDLC);
and also
cl_init(&meterSettings, 1, 16, 1, DLMS_AUTHENTICATION_LOW, "ABCDEFGH", DLMS_INTERFACE_TYPE_HDLC);

We are trying to set our meters to local time instead of utc time. Which we used to do.
This means that we have set the offset and timezone info in the meter Clock object. We have done this correctly.

When we read the buffer (ReadRowsByRange) of most meters, we receive a GXDateTime per row that contains a correct DateTimeOffset for our time zone.

Hello
Im trying to connect my iskraemeco ME-172 with gxdlmsdirector
ive compleated all the required items and when i press CONNECT it says :
"failed to receive reply from the given device"

plz help

I am trying to communicate with Sanxing meter. This is communication log:

[06:58:27:767] - Open port COM11 (c:\elma\edex\dlms.exe)

Hi Mikko,

My AMR sample program is reading data from the meter continuously in one thread. I want run to check connection status in another thread. But how will client (AMR application) get disconnection status from the meter? Is any call back function there?

If AMR application get disconnection status, then it could try to reconnect to the meter.

Kindly suggest me what should I do to get disconnection status?

Thanks & Regards,
Pradson

Hi. I'm trying to create a simple C# Meter client, but after the connection configuration I have an error on GetAssociationView request. The message exception returned it's the seguent:

Gurux.DLMS.GXDLMSException: Access Error : Device reports a unavailable object.
in Gurux.DLMS.Reader.GXDLMSReader.ReadDLMSPacket(Byte[] data, GXReplyData reply) in ...

Thank for your support.

BR

MatteoS

I ask you to get acquainted with the implementation of the TCP/IP connection.
https://github.com/iMeter/dlms-cosem

Hi
I am trying to set capture period for the HAN port P1 on a Star meter (obis code 0.0.21.0.0.255).
Reading the period works just fine using GXDLMSProfileGeneric, however when I try to set it I get " Device reports a unavailable object."

var gxDlmsObject = new GXDLMSProfileGeneric("0.0.21.0.0.255");
GxDlmsClient.Write(profile, 4);

Thanks in advance