How to set up landis gyr cu-l52 lte meter module for remote communication

Forum Rules

Before commenting read Forum rules

Don't comment the topic if you have a new question.

You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.

By Noahmaf15 , 8 February, 2020
Forums
General discussion

Hello

I’m a student at a University and I was picked by this electricity company to find a way for them to communicate with the landis gyr cu-l52 lte module remotely via sim card data, it’s my first time working with this hardware and software, if anyone can, please kindly assist me

Kurumi

6 years 4 months ago

Hi,

You can use GXDLMSDirector to read data from your meter. Download it and select Landis+Gyr for the manufacturer. Then set the correct IP address and start reading your meters.

BR,
Mikko

Abdulsalam

3 years 10 months ago

Please I would be grateful to know how to configure cu-XE and CU-L52 communications modules using MAP 120

Kurumi

3 years 10 months ago

Hi,

Make sure that you are using static IP addresses with the SIM card. The meter must start the communication if you are using a dynamic IP address.

There are so many settings that must be correct or your communication fails. I propose you contact your meter vendor and ask for the correct settings.

BR,
Mikko