Before commenting read Forum rules
Don't comment the topic if you have a new question.
You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.
Forums
Hello,
I am new to DLMS. I have tested lots of obis codes and functionality of DLMS with Arduino Mega, and its work fine.
My Meter supports IS 15959. According to IS15959 documentations it has over voltage and under voltage event generation capability with OBIS : "0.0.96.11.0.255", which will return event ID.
I have generated low voltage condition (Volt: 100V), and tried about 30 min or more, but when I read "0.0.96.11.0.255". it returns 0 event ID in return.
Event:Power Related, OBIS: "0.0.96.11.2.255" is working fine, it shows meter power on and off id, and in its log profile OBIS "0.0.99.98.2.255", also shows event id with timestamp.
So how I verify Voltage events or any method I have to change to get voltage related events.
Thank You
Hi,
Hi,
Our clients are Voltage Related-events and it should work. I believe that there is an error in your meter. Can you ask the meter manufacturer to verify this?
BR,
Mikko
Hello,
Hello,
Is there any configurations that should be made before voltage related events to be perform, like threshold setting and time to observe under voltage conditions etc. I didn't find any information regarding configuration, So Is threshold and timeout values are set by default.
Thanks
Hi,
Hi,
You can try to check register monitor object thresholds values and what are actions to do when the threshold value is crossed. I know that some meters are using internal actions and don't show actions in the list. Try if you can add or modify thresholds or actions.
BR,
Mikko