To Get Push data and events over serial interface

Forum Rules

Before commenting read Forum rules

Don't comment the topic if you have a new question.

You can create a new topic selecting correct category from Gurux Forum and then create a new topic selecting "New Topic" from the top left.

By Bhaumik , 11 April, 2020
Forums
Gurux.Serial

Hi Mikko,

We are using Indian standard meter. Can we get Push Data and Events over Serial interface if we do not have internet connectivity with meter.
Also there is no option to set com port for configuring push address, there is only IP address, in GXDLMSDirector.

Can you please provide an update.

Bhaumik

6 years 3 months ago

Hi Mikko,

Can you please provide an update.

Kurumi

6 years 3 months ago

Hi,

GXDLMSClient don't show received push events from the serial port at the moment. Only TCP/IP connection is supported.

You need to make your own app for that. We can add support for serial port, but it takes a few days.

BR,
Mikko

Bhaumik

6 years 3 months ago

Hi Mikko,

Thanks for the quick update.

Is it possible for the Meter (DLMS Server) as per DLMS standard to send Push Data and Push Events
over serial?

Can the Meter Manufacture make changes in their Meter firmware to support sending Push Data
and Push Events over serial interface?

Kurumi

6 years 3 months ago

Hi,

Some meters expect that connection to the meter is established if push messages are sent using a serial port. They don't send event messages if the client is not connected to the meter.

You need to ask this from the meter manufacturer.

BR,
Mikko

Bhaumik

6 years 3 months ago

Hi Mikko,

Whether sending Push Data and Push Events over serial interface is valid in IS16444 or even as per DLMS standard.

If the Meter manufacturer modifies their firmware to send Push Data and Push Events over Serial, will they violate the DLMS specifications.

Kurumi

6 years 3 months ago

Hi,

DLMS is a very open standard. It doesn't define that the meter must send Push data or events to pass DLMS certificate tests. The meter may or may not send push messages over the serial port.

BR,
Mikko

RochLevoff

6 years 2 months ago

Hi....Is it possible to monitor a serial port for a simple push button switch that would cross two pins of a rs232 port? I am looking for a way to trigger an event in a patch with a simple push button switch, using an Arduino board seems over kill.

HI,

Please, create a new topic if you have a new question. But no, it's not possible.

BR,

Mikko